getgbens.f

Go to the documentation of this file.

C> @file
C> @brief Find and unpack a grib message.
C> @author Mark Iredell  @date 1994-04-01
 
C> Read a grib index file (or optionally the grib file itself)
C> to get the index buffer (i.e. table of contents) for the grib file.
C> (The index buffer is saved for use by future prospective calls.)
C> Find in the index buffer a reference to the grib message requested.
C> The grib message request specifies the number of messages to skip
C> and the unpacked pds and gds parameters. (A requested parameter
C> of -1 means to allow any value of this parameter to be found.)
C> If the requested grib message is found, then it is read from the
C> grib file and unpacked. Its message number is returned along with
C> the unpacked pds and gds parameters, the unpacked bitmap (if any),
C> and the unpacked data. If the grib message is not found, then the
C> return code will be nonzero.
C> This obsolescent version has been replaced by getgbe.
C>
C> Program history log:
C>  - Mark Iredell 1994-04-01
C>  - Mark Iredell 1995-10-31 Modularized portions of code into subprograms
C>  and allowed for unspecified index file.
C>
C> @param[in] lugb integer unit of the unblocked grib data file.
C> @param[in] lugi integer unit of the unblocked grib index file
C> (=0 to get index buffer from the grib file).
C> @param[in] jf integer maximum number of data points to unpack.
C> @param[in] j integer number of messages to skip
C> (=0 to search from beginning)
C> (<0 to read index buffer and skip -1-j messages).
C> @param[in] jpds integer (200) pds parameters for which to search
C> (=-1 for wildcard).
C> - 1: id of center.
C> - 2: generating process id number.
C> - 3: grid definition.
C> - 4: gds/bms flag (right adj copy of octet 8).
C> - 5: indicator of parameter.
C> - 6: type of level.
C> - 7: height/pressure , etc of level.
C> - 8: year including (century-1).
C> - 9: month of year.
C> - 10: day of month.
C> - 11: hour of day.
C> - 12: minute of hour.
C> - 13: indicator of forecast time unit.
C> - 14: time range 1.
C> - 15: time range 2.
C> - 16: time range flag.
C> - 17: number included in average.
C> - 18: version nr of grib specification.
C> - 19: version nr of parameter table.
C> - 20: nr missing from average/accumulation.
C> - 21: century of reference time of data.
C> - 22: units decimal scale factor.
C> - 23: subcenter number.
C> - 24: pds byte 29, for nmc ensemble products.
C>   - 128 if forecast field error.
C>   - 64 if bias corrected fcst field.
C>   - 32 if smoothed field.
C>   - warning: can be combination of more than 1.
C> - 25: pds byte 30, not used.
C> @param[in] jgds         integer (200) gds parameters for which to search
C> (only searched if jpds(3)=255)
C> (=-1 for wildcard).
C> - 1: data representation type.
C> - 19: number of vertical coordinate parameters.
C> - 20: octet number of the list of vertical coordinate parameters or
C> octet number of the list of numbers of points in each row or
C> 255 if neither are present.
C> - 21: for grids with pl, number of points in grid.
C> - 22: number of words in each row.
C> - Latitude/longitude grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag (right adj copy of octet 17).
C>  - 7: la(2) latitude of extreme point.
C>  - 8: lo(2) longitude of extreme point.
C>  - 9: di longitudinal direction of increment.
C>  - 10: dj latitudinal direction increment.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C> - Gaussian  grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag  (right adj copy of octet 17).
C>  - 7: la(2) latitude of extreme point.
C>  - 8: lo(2) longitude of extreme point.
C>  - 9: di longitudinal direction of increment.
C>  - 10: n - nr of circles pole to equator.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: nv - nr of vert coord parameters.
C>  - 13: pv - octet nr of list of vert coord parameters or
C>   - pl - location of the list of numbers of points in each row
C>   (if no vert coord parameters are present) or 255 if neither are present.
C> - Polar stereographic grids.
C>  - 2: n(i) nr points along lat circle.
C>  - 3: n(j) nr points along lon circle.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag  (right adj copy of octet 17).
C>  - 7: lov grid orientation.
C>  - 8: dx - x direction increment.
C>  - 9: dy - y direction increment.
C>  - 10: projection center flag.
C>  - 11: scanning mode (right adj copy of octet 28).
C> - Spherical harmonic coefficients.
C>  - 2: j pentagonal resolution parameter.
C>  - 3: k pentagonal resolution parameter.
C>  - 4: m pentagonal resolution parameter.
C>  - 5: representation type.
C>  - 6: coefficient storage mode.
C> - Mercator grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag (right adj copy of octet 17).
C>  - 7: la(2) latitude of last grid point.
C>  - 8: lo(2) longitude of last grid point.
C>  - 9: latit - latitude of projection intersection.
C>  - 10: reserved.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: longitudinal dir grid length.
C>  - 13: latitudinal dir grid length.
C> - Lambert conformal grids.
C>  - 2: nx nr points along x-axis.
C>  - 3: ny nr points along y-axis.
C>  - 4: la1 lat of origin (lower left).
C>  - 5: lo1 lon of origin (lower left).
C>  - 6: resolution (right adj copy of octet 17).
C>  - 7: lov - orientation of grid.
C>  - 8: dx - x-dir increment.
C>  - 9: dy - y-dir increment.
C>  - 10: projection center flag.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: latin 1 - first lat from pole of secant cone inter.
C>  - 13: latin 2 - second lat from pole of secant cone inter.
C> @param[in] jens integer (200) ensemble pds parms for which to search
C> (only searched if jpds(23)=2)
C> (=-1 for wildcard).
C> - 1: application identifier.
C> - 2: ensemble type.
C> - 3: ensemble identifier.
C> - 4: product identifier.
C> - 5: smoothing flag.
C>
C> @param[out] kf integer number of data points unpacked.
C> @param[out] k integer message number unpacked
C> (can be same as j in calling program
C> in order to facilitate multiple searches).
C> @param[out] kpds integer (200) unpacked pds parameters.
C> @param[out] kgds integer (200) unpacked gds parameters.
C> @param[out] kens integer (200) unpacked ensemble pds parms.
C> @param[out] lb logical*1 (kf) unpacked bitmap if present.
C> @param[out] f real (kf) unpacked data.
C> @param[out] iret integer return code.
C> - 0: all ok.
C> - 96: error reading index file.
C> - 97: error reading grib file.
C> - 98: number of data points greater than jf.
C> - 99: request not found.
C> - other w3fi63 grib unpacker return code.
C>
C> @note In order to unpack grib from a multiprocessing environment
C> where each processor is attempting to read from its own pair of
C> logical units, one must directly call subprogram getgbem as below,
C> allocating a private copy of cbuf, nlen and nnum to each processor.
C> do not engage the same logical unit from more than one processor.
C>
C> @author Mark Iredell  @date 1994-04-01
C-----------------------------------------------------------------------
      SUBROUTINE getgbens(LUGB,LUGI,JF,J,JPDS,JGDS,JENS,
     &                    KF,K,KPDS,KGDS,KENS,LB,F,IRET)
      INTEGER JPDS(200),JGDS(200),JENS(200)
      INTEGER KPDS(200),KGDS(200),KENS(200)
      LOGICAL*1 LB(JF)
      REAL F(JF)
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
      print *,'PLEASE USE GETGBE RATHER THAN GETGBENS'
      CALL getgbe(lugb,lugi,jf,j,jpds,jgds,jens,
     &            kf,k,kpds,kgds,kens,lb,f,iret)
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
      RETURN
      END