getgbmh.f

Go to the documentation of this file.

C> @file
C> @brief Finds a grib message.
C> @author Mark Iredell @date 1994-04-01
 
C> Read a grib index file (or optionally the grib file itself)
C> to get the index buffer (i.e. table of contents) for the grib file.
C> Find in the index buffer a reference to the grib message requested.
C> The grib message request specifies the number of messages to skip
C> and the unpacked pds and gds parameters. (A requested parameter
C> of -1 means to allow any value of this parameter to be found.)
C> If the requested grib message is found, then its message number is
C> returned along with the unpacked pds and gds parameters. If the
C> grib message is not found, then the return code will be nonzero.
C>
C> Program history log:
C> - Mark Iredell 1994-04-01
C> - Mark Iredell 1995-10-31 Modularized portions of code into subprograms
C> and allowed for unspecified index file.
C>
C> @param[in] lugb integer unit of the unblocked grib data file
C> (only used if lugi=0).
C> @param[in] lugi integer unit of the unblocked grib index file
C> (=0 to get index buffer from the grib file).
C> @param[in] j integer number of messages to skip
C> (=0 to search from beginning)
C> (<0 to read index buffer and skip -1-j messages).
C> @param[in] jpds integer (200) pds parameters for which to search
C> (=-1 for wildcard).
C> - 1: id of center.
C> - 2: generating process id number.
C> - 3: grid definition.
C> - 4: gds/bms flag (right adj copy of octet 8).
C> - 5: indicator of parameter.
C> - 6: type of level.
C> - 7: height/pressure , etc of level.
C> - 8: year including (century-1).
C> - 9: month of year.
C> - 10: day of month.
C> - 11: hour of day.
C> - 12: minute of hour.
C> - 13: indicator of forecast time unit.
C> - 14: time range 1.
C> - 15: time range 2.
C> - 16: time range flag.
C> - 17: number included in average.
C> - 18: version nr of grib specification.
C> - 19: version nr of parameter table.
C> - 20: nr missing from average/accumulation.
C> - 21: century of reference time of data.
C> - 22: units decimal scale factor.
C> - 23: subcenter number.
C> - 24: pds byte 29, for nmc ensemble products.
C>  - 128 if forecast field error.
C>  - 64 if bias corrected fcst field.
C>  - 32 if smoothed field.
C>  - warning: can be combination of more than 1.
C> - 25: pds byte 30, not used.
C> @param[in] jgds integer (200) gds parameters for which to search
C> (only searched if jpds(3)=255)
C> (=-1 for wildcard).
C> - 1: data representation type.
C> - 19: number of vertical coordinate parameters.
C> - 20: octet number of the list of vertical coordinate parameters or
C> octet number of the list of numbers of points in each row or
C> 255 if neither are present.
C> - 21: for grids with pl, number of points in grid.
C> - 22: number of words in each row.
C> - Latitude/longitude grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag (right adj copy of octet 17).
C>  - 7: la(2) latitude of extreme point.
C>  - 8: lo(2) longitude of extreme point.
C>  - 9: di longitudinal direction of increment.
C>  - 10: dj latitudinal direction increment.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C> - Gaussian grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag  (right adj copy of octet 17).
C>  - 7: la(2) latitude of extreme point.
C>  - 8: lo(2) longitude of extreme point.
C>  - 9: di longitudinal direction of increment.
C>  - 10: n - nr of circles pole to equator.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: nv - nr of vert coord parameters.
C>  - 13: pv - octet nr of list of vert coord parameters or
C> pl - location of the list of numbers of points in  each row
C> (if no vert coord parameters are present or
C> 255 if neither are present
C> - Polar stereographic grids.
C>  - 2: n(i) nr points along lat circle.
C>  - 3: n(j) nr points along lon circle.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag  (right adj copy of octet 17).
C>  - 7: lov grid orientation.
C>  - 8: dx - x direction increment.
C>  - 9: dy - y direction increment.
C>  - 10: projection center flag.
C>  - 11: scanning mode (right adj copy of octet 28).
C> - Spherical harmonic coefficients.
C>  - 2): j pentagonal resolution parameter.
C>  - 3): k pentagonal resolution parameter.
C>  - 4): m pentagonal resolution parameter.
C>  - 5): representation type.
C>  - 6): coefficient storage mode.
C> - Mercator grids.
C>  - 2: n(i) nr points on latitude circle.
C>  - 3: n(j) nr points on longitude meridian.
C>  - 4: la(1) latitude of origin.
C>  - 5: lo(1) longitude of origin.
C>  - 6: resolution flag (right adj copy of octet 17).
C>  - 7: la(2) latitude of last grid point.
C>  - 8: lo(2) longitude of last grid point.
C>  - 9: latit - latitude of projection intersection.
C>  - 10: reserved.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: longitudinal dir grid length.
C>  - 13: latitudinal dir grid length.
C> - Lambert conformal grids.
C>  - 2: nx nr points along x-axis.
C>  - 3: ny nr points along y-axis.
C>  - 4: la1 lat of origin (lower left).
C>  - 5: lo1 lon of origin (lower left).
C>  - 6: resolution (right adj copy of octet 17).
C>  - 7: lov - orientation of grid.
C>  - 8: dx - x-dir increment.
C>  - 9: dy - y-dir increment.
C>  - 10: projection center flag.
C>  - 11: scanning mode flag (right adj copy of octet 28).
C>  - 12: latin 1 - first lat from pole of secant cone inter.
C>  - 13: latin 2 - second lat from pole of secant cone inter.
C> @param[in] mbuf integer length of index buffer in bytes.
C> @param[inout] cbuf character*1 (mbuf) index buffer
C> (initialize by setting j=-1).
C> @param[inout] nlen integer length of each index record in bytes
C> (initialize by setting j=-1).
C> @param[inout] nnum integer number of index records
C> (initialize by setting j=-1).
C> @param[inout] mnum integer number of index records skipped
C> (initialize by setting j=-1).
C> @param[out] kg integer number of bytes in the grib message.
C> @param[out] kf integer number of data points in the message.
C> @param[out] k integer message number unpacked
C> (can be same as j in calling program in order to facilitate multiple searches).
C> @param[out] kpds integer (200) unpacked pds parameters.
C> @param[out] kgds integer (200) unpacked gds parameters.
C> @param[out] iret integer return code.
C> - 0: all ok.
C> - 96: error reading index file.
C> - 99: request not found.
C>
C> @note Specify an index file if feasible to increase speed.
C> Subprogram can be called from a multiprocessing environment.
C> Do not engage the same logical unit from more than one processor.
C>
C> @author Mark Iredell @date 1994-04-01
C-----------------------------------------------------------------------
      SUBROUTINE getgbmh(LUGB,LUGI,J,JPDS,JGDS,
     &                   MBUF,CBUF,NLEN,NNUM,MNUM,
     &                   KG,KF,K,KPDS,KGDS,IRET)
      INTEGER JPDS(200),JGDS(200)
      INTEGER KPDS(200),KGDS(200)
      CHARACTER CBUF(MBUF)
      parameter(msk1=32000,msk2=4000)
      INTEGER JENS(200),KENS(200)
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C  SEARCH PREVIOUS INDEX BUFFER IF POSSIBLE
      jens=-1
      IF(j.GE.0) THEN
        IF(mnum.GE.0) THEN
          irgi=0
        ELSE
          mnum=-1-mnum
          irgi=1
        ENDIF
        jr=j-mnum
        IF(jr.GE.0.AND.(jr.LT.nnum.OR.irgi.EQ.0)) THEN
          CALL getgb1s(cbuf,nlen,nnum,jr,jpds,jgds,jens,
     &                 kr,kpds,kgds,kens,lskip,lgrib,irgs)
          IF(irgs.EQ.0) k=kr+mnum
          IF(irgi.EQ.1.AND.irgs.EQ.0) mnum=-1-mnum
          IF(irgi.EQ.1.AND.irgs.GT.0) mnum=mnum+nnum
        ELSE
          mnum=j
          irgi=1
          irgs=1
        ENDIF
      ELSE
        mnum=-1-j
        irgi=1
        irgs=1
      ENDIF
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C  READ AND SEARCH NEXT INDEX BUFFER
      jr=0
      dowhile(irgi.EQ.1.AND.irgs.EQ.1)
        IF(lugi.GT.0) THEN
          CALL getgi(lugi,mnum,mbuf,cbuf,nlen,nnum,irgi)
        ELSE
          CALL getgir(lugb,msk1,msk2,mnum,mbuf,cbuf,nlen,nnum,irgi)
        ENDIF
        IF(irgi.LE.1) THEN
          CALL getgb1s(cbuf,nlen,nnum,jr,jpds,jgds,jens,
     &                 kr,kpds,kgds,kens,lskip,lgrib,irgs)
          IF(irgs.EQ.0) k=kr+mnum
          IF(irgi.EQ.1.AND.irgs.EQ.0) mnum=-1-mnum
          IF(irgi.EQ.1.AND.irgs.GT.0) mnum=mnum+nnum
        ENDIF
      ENDDO
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C  READ GRIB RECORD
      IF(irgi.GT.1) THEN
        iret=96
      ELSEIF(irgs.NE.0) THEN
        iret=99
      ELSE
        kg=lgrib
        kf=lengds(kgds)
        iret=0
      ENDIF
C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
      RETURN
      END