OTLFT.f

Go to the documentation of this file.

 
 
! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 
      SUBROUTINE otlft(PBND,TBND,QBND,SLINDX)
 
!     
!     
      use vrbls2d,    only: t500
      use lookup_mod, only: thl, rdth, jtb, qs0, sqs, rdq, itb, ptbl, &
                            pl, rdp, the0, sthe, rdthe, ttbl
      use ctlblk_mod, only: jsta, jend, im, spval, ista, iend
      use params_mod, only: d00, h10e5, capa, elocp, eps, oneps
      use upp_physics, only: fpvsnew
!- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
       implicit none
!
!     SET LOCAL PARAMETERS.
       real,PARAMETER :: D8202=.820231e0 , h5e4=5.e4 , p500=50000.
 
!     
!     DECLARE VARIABLES.
      real,dimension(ista:iend,jsta:jend),intent(in)  :: PBND,TBND,QBND
      real,dimension(ista:iend,jsta:jend),intent(out) :: SLINDX
      REAL :: TVP, ESATP, QSATP
      REAL :: BQS00, SQS00, BQS10, SQS10, P00, P10, P01, P11, BQ, SQ, TQ
      REAL :: BTHE00, STHE00, BTHE10, STHE10, BTH, STH, TTH
      REAL :: T00, T10, T01, T11, TBT, QBT, APEBT, TTHBT, PPQ, PP
      REAL :: TQQ, QQ, TPSP, APESP, TTHES, TP, PARTMP
!     
      INTEGER :: I, J, ITTBK, IQ, IT, IPTBK, ITH, IP
      INTEGER :: ITTB, IQTB, IPTB, ITHTB
!     
!********************************************************************
!     START OTLFT HERE.
!     
!     ZERO LIFTED INDEX ARRAY.
!
!$omp parallel do private(i,j)
      DO j=jsta,jend
        DO i=ista,iend
          slindx(i,j) = d00
        ENDDO
      ENDDO
!
!--------------FIND EXNER IN BOUNDARY LAYER-----------------------------
!
      DO j=jsta,jend
        DO i=ista,iend
          tbt = tbnd(i,j) 
          qbt = qbnd(i,j)
!
          if( tbt < spval ) then
 
          apebt = (h10e5/pbnd(i,j))**capa
!
!--------------SCALING POTENTIAL TEMPERATURE & TABLE INDEX--------------
!
          tthbt = tbt*apebt
          tth=(tthbt-thl)*rdth
          tqq = tth-aint(tth)
          ittb = int(tth)+1
!
!--------------KEEPING INDICES WITHIN THE TABLE-------------------------
!
          IF(ittb < 1)THEN
            ittb = 1
            tqq = d00
          ENDIF
          IF(ittb >= jtb)THEN
            ittb = jtb-1
            tqq = d00
          ENDIF
!
!--------------BASE AND SCALING FACTOR FOR SPEC. HUMIDITY---------------
!
          ittbk = ittb
          bqs00=qs0(ittbk)
          sqs00=sqs(ittbk)
          bqs10=qs0(ittbk+1)
          sqs10=sqs(ittbk+1)
!
!--------------SCALING SPEC. HUMIDITY & TABLE INDEX---------------------
!
          bq=(bqs10-bqs00)*tqq+bqs00
          sq=(sqs10-sqs00)*tqq+sqs00
          tq=(qbt-bq)/sq*rdq
          ppq = tq-aint(tq)
          iqtb = int(tq)+1
!
!--------------KEEPING INDICES WITHIN THE TABLE-------------------------
!
          IF(iqtb < 1)THEN
            iqtb = 1
            ppq = d00
          ENDIF
          IF(iqtb >= itb)THEN
            iqtb = itb-1
            ppq = d00
          ENDIF
!
!--------------SATURATION PRESSURE AT FOUR SURROUNDING TABLE PTS.-------
!
          iq=iqtb
          it=ittb
          p00=ptbl(iq,it)
          p10=ptbl(iq+1,it)
          p01=ptbl(iq,it+1)
          p11=ptbl(iq+1,it+1)
!
!--------------SATURATION POINT VARIABLES AT THE BOTTOM-----------------
!
          tpsp = p00+(p10-p00)*ppq+(p01-p00)*tqq     &
               +(p00-p10-p01+p11)*ppq*tqq
          IF(tpsp <= d00) tpsp = h10e5
          apesp = (h10e5/tpsp)**capa
          tthes = tthbt*exp(elocp*qbt*apesp/tthbt)
!
!-----------------------------------------------------------------------
!
!
!--------------SCALING PRESSURE & TT TABLE INDEX------------------------
!
          tp = (h5e4-pl)*rdp
          qq = tp-aint(tp)
          iptb = int(tp)+1
!
!--------------KEEPING INDICES WITHIN THE TABLE-------------------------
!
          IF(iptb < 1)THEN
            iptb = 1
            qq = d00
          ENDIF
          IF(iptb >= itb)THEN
            iptb = itb-1
            qq = d00
          ENDIF
!
!--------------BASE AND SCALING FACTOR FOR THE--------------------------
!
          iptbk=iptb
          bthe00=the0(iptbk)
          sthe00=sthe(iptbk)
          bthe10=the0(iptbk+1)
          sthe10=sthe(iptbk+1)
!
!--------------SCALING THE & TT TABLE INDEX-----------------------------
!
          bth=(bthe10-bthe00)*qq+bthe00
          sth=(sthe10-sthe00)*qq+sthe00
          tth=(tthes-bth)/sth*rdthe
          pp = tth-aint(tth)
          ithtb = int(tth)+1
!
!--------------KEEPING INDICES WITHIN THE TABLE-------------------------
!
          IF(ithtb < 1)THEN
            ithtb = 1
            pp = d00
          ENDIF
          IF(ithtb >= jtb)THEN
            ithtb = jtb-1
            pp = d00
          ENDIF
!
!--------------TEMPERATURE AT FOUR SURROUNDING TT TABLE PTS.------------
!
          ith=ithtb
          ip=iptb
          t00=ttbl(ith,ip)
          t10=ttbl(ith+1,ip)
          t01=ttbl(ith,ip+1)
          t11=ttbl(ith+1,ip+1)
!
!--------------PARCEL TEMPERATURE AT 500MB----------------------------
!
          IF(tpsp >= h5e4)THEN
            partmp=(t00+(t10-t00)*pp+(t01-t00)*qq     &
                  +(t00-t10-t01+t11)*pp*qq)
          ELSE
            partmp=tbt*apebt*d8202
          ENDIF
!
!--------------LIFTED INDEX---------------------------------------------
!
! GSM  THE PARCEL TEMPERATURE AT 500 MB HAS BEEN COMPUTED, AND WE
!       FIND THE MIXING RATIO AT THAT LEVEL WHICH WILL BE THE SATURATION
!       VALUE SINCE WE'RE FOLLOWING A MOIST ADIABAT.    NOTE THAT THE
!       AMBIENT 500 MB SHOULD PROBABLY BE VIRTUALIZED, BUT THE IMPACT
!       OF MOISTURE AT THAT LEVEL IS QUITE SMALL
           esatp=fpvsnew(partmp)
           qsatp=eps*esatp/(p500-esatp*oneps)
           tvp=partmp*(1+0.608*qsatp)
           slindx(i,j)=t500(i,j)-tvp
 
           else
             slindx(i,j)=spval
           endif
         END DO
       END DO
!     
!     END OF ROUTINE.
      RETURN
      END